If your toilet is acting up, there are a few clear signs. You might hear water running all the time, notice a slow flushing toilet, or see water leaking around the base or from the toilet tank. A clogged toilet, weak toilet flush, or ghost flushing (when it flushes on its own) are also common toilet problems. These issues usually mean something inside the tank, like the flapper valve, fill valve, or flush mechanism, needs attention.

A running toilet is often caused by worn-out parts inside the tank. The toilet flapper (or rubber flapper) may not be creating a good seal, or the fill valve assembly may not be shutting off the water flow properly. Sometimes the float valve or overflow tube is out of the right position. We fix this by adjusting or replacing the faulty valve or parts so the water level stays where it should and the toilet works normally again.

Yes, most clogged toilet issues are an easy fix. We use the right tools to clear the drain safely without damaging your toilet bowl or pipes. If the clog is deeper, we’ll check the toilet flange or drain line to make sure there isn’t a bigger blockage. Our goal is to get everything flowing again fast so your bathroom is back to normal.

The most common parts we replace are the toilet flapper, fill valve, flush valve, and sometimes the flush handle or toilet handle. These parts wear out over time but are easily replaced. In some cases, we may install a full repair kit that includes a new fill valve replacement and flapper valve to improve how your toilet flushes and stop leaking water.

If you see leaking water around the floor, the problem could be the wax ring or toilet flange under the toilet. These parts create a seal between the toilet and the drain. When they fail, water can leak out. This type of repair involves lifting the entire toilet and installing a new wax ring to create a good seal again.

A slow flushing toilet can happen when there’s low water pressure, buildup in the rim holes, or an issue inside the tank, like a weak flush valve or low water level. It could also be a partial clog in the drain. We check the water supply valve, refill tube, and tank components to make sure everything is working together properly and giving you a strong flush.

Most of the time, repair is the better option. Many issues, like a faulty fill valve, flapper, or flush mechanism, are simple and cost-effective to fix. However, if the toilet tank is cracked, the bowl is damaged, or repairs keep adding up, it may be time to install a new toilet. We’ll walk you through both options so you can make the best choice.

Some small repairs can be done with step-by-step instructions, especially if you’re replacing simple parts from a local hardware store, like a flapper or flush handle. But if you’re dealing with leaking, water running nonstop, or problems with the supply line or water pressure, it’s usually best to call a professional plumber. That way, the job is done right the first time without causing bigger issues.